VIP
J Series
Air Cylinder — Round Type — J Series Features:
Air Cylinder J Series
Built-in magnet is a standard equipment. Non-lubricated air applicable
| Series | Acting |
Bore size (mm) |
Standard stroke (mm) |
Pressure range MPa(kgf/cm²) |
| JC1 | Single acting (Extended) | φ 20 | 15,25,50 |
0.2~0.7 (2~7) |
| φ 25 | 25,50 | |||
| JC0 | Single acting (Retracted) | φ 20 | 15,25,50 | |
| φ 25 | 25,50 | |||
| JG2 | Double acting | φ 20 | 15,25,50,75,100 |
0.1~0.7 (1~7) |
| φ 25 | 25,50,75,100 | |||
| φ 32 | 25,50,75,100 125,150 | |||
| φ 40 | 50,75,100 125,150 |
● Mounting / Nose, Foot, Flange and Male clevis mounting
● Switch / M type switch (reed type, proximity type) mountable.
● Cushion / Rubber cushion (Standard), Air cushion (Double acting only)
Air Cylinder Double Rod Type J☐7 Series
| Series | Acting |
Bore size (mm) |
Standard stroke (mm) |
Pressure range MPa(kgf/cm²) |
| J☐7 | Double acting | φ 20 | 15,25,50,75,100 |
0.1~0.7 (1~7) |
| φ 25 | 25,50,75,100 | |||
| φ 32 |
25,50,75,100 125,150 |
|||
| φ 40 |
50,75,100 125,150 |
● Mounting / Nose, Foot, Flange and Male clevis mounting
● Switch / M type switch (reed type, proximity type) mountable.
● Cushion/ Built-in air cushion
Air Cylinder with Air Cushion J Series
| Series | Acting |
Bore size (mm) |
Standard stroke (mm) |
Pressure range MPa(kgf/cm²) |
| JG2-※B | Double acting | φ 20 | 15,25,50,75,100 |
0.1~0.7 (1~7) |
| φ 25 |
25,50,75,100 125,150 |
|||
| φ 32 |
25,50,75,100 125,150 |
|||
| φ 40 |
50,75,100 125,150 |
● Mounting / Nose, Foot, Flange and Male clevis mounting
● Switch / M type switch (reed type, proximity type) mountable.
● Cushion / Built-in air cushion
Direct Mount Cylinder J☐E Series
The rectangular rod cover of the cylinder is directly mountable on the unit to be mated. Using this cylinder will result not only in saving space but also improving the mounting strength and accuracy
| Series | Acting |
Bore size (mm) |
Standard stroke (mm) |
Pressure range MPa(kgf/cm²) |
|
J☐ES2 (Bottom) J☐EF2 (Front) |
Double acting | φ 20 | 15,25,50,75,100 |
0.1~0.7 (1~7) |
| φ 25 |
25,50,75,100 125,150 |
|||
| φ 32 |
25,50,75,100 125,150 |
|||
| φ 40 |
50,75,100 125,150 |
● Mounting / Bottom surface, Front surface
● Switch / M type switch (reed type, proximity type) mountable.
● Cushion/ Rubber cushion
Cylinder with Lock Mechanism J☐L Series
Built-in drop prevention and designed to lock at stroke end
| Series | Acting |
Bore size (mm) |
Standard stroke (mm) |
Lock position |
Pressure range MPa(kgf/cm²) |
| J☐L2 | Double acting | φ 20 | 25,50,75,100 | Rod or head side |
0.1~0.7 (1~7) |
| φ 25 | 25,50,75,100 | ||||
| φ 32 |
25,50,75,100 125,150 |
||||
| φ 40 |
50,75,100 125,150 |
● Mounting / Nose, Foot, Flange, and Center trunion mounting
● Switch / M type switch (reed type, proximity type) mountable.
● Cushion / Rubber cushion(Standard), Air cushion
Single Rod Dual Stroke Cylinder JGD2 Series
This cylinder consists of two cylinders connected in series and united as one unit
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.1~0.7MPa(1~7kgf/cm²) |
Double Rod Dual Stroke Cylinder JGD7 Series
This cylinder consists of two cylinders connected back to back to form one unit
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.1~0.7MPa(1~7kgf/cm²) |
Adjustable Stroke Cylinder JGA7 Series
On the end where the rod is extended, the stroke is adjustable with a stopper within a range of 0 to 50mm
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.1~0.7MPa(1~7kgf/cm²) |
Adjustable Stroke Cylinder JGA2 Series
On the rod retracted end, the stroke is adjustable with an adjustable bolt within a range of 0 to 50mm
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.1~0.7MPa(1~7kgf/cm²) |
Low-Speed Cylinder JGJ2 Series
None stick operation at 10mm/s
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.1~0.7MPa(1~7kgf/cm²) |
High-Temperature Cylinder JCX Series
Made of heat-resistant materials which can operate at high temperatures up to 150 0C
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.1~0.7MPa(1~7kgf/cm²) |
Air-Hydro Cylinder JGO Series
Cylinder of this series are for air-hydro systems and are suitable for use at low speeds of 50mm/s or less
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.12~0.7MPa(1.2~7kgf/cm²) |
Short Length Cylinder JGND Series
Cylinder short in overall length: The nose screw portion on the head cover has been cut off
| Acting | Double acting |
| Bore size(mm) | φ 20,φ 25,φ 32,φ 40 |
| Pressure range | 0.12~0.7MPa(1.2~7kgf/cm²) |